Cornelius keg 23L from AEB - ball lock

Cornelius Keg 23L - AEB (R Jolly Keg)

Time to stop bottling, a tedious process involving washing and filling, often resulting in inconsistent carbonation? Everything becomes so much simpler with kegs! You only have to wash one Cornelius keg instead of 40-50 bottles, and it's super easy to achieve perfect carbonation for every brew. If the carbonation is off, you can simply release CO2 or add a bit more pressure. Cornelius kegs are also very easy to clean, especially with a Keg Washer doing the job for you while you focus on more fun things. The Cornelius keg can be filled directly from the fermenter without racking first. Feel free to use a Bouncer Filter on the hose to prevent too much sediment from transferring into the keg.

Brewshop is the Norwegian distributor for AEB, Italy. We now also offer the unique 23L R Jolly Cornelius kegs for ball lock quick disconnects, which can hold an entire batch. No more bottling the last 2-3 liters!

PS! The 23L keg uses dedicated valves, dip tubes, and O-rings. You cannot use spare parts for 9-20 liter Cornelius kegs, with the exception of the lid, which is the same as on 9-20L Cornelius kegs.

Details:

Comes complete with lid, stainless steel pressure relief valve, in/out valve, dip tube, and CO2 tube.

Height 67cm, diameter 23cm.

All kegs from AEB are passivated to make the steel resistant to corrosion and chemical attack, and individually inspected at every stage of production, cleaned, and pressure tested to 130 PSI / 9.1 bar. Each keg has a unique serial number and is traceable down to the smallest detail during production.

Maintenance recommendations:

The use of Star San and similar acid-based rinses containing phosphoric acid, even in low concentrations, can over time negatively affect the steel if left in contact with it. This continues to etch the surface, weakening the passivation layer that protects the steel. The acid-based solution can be stored in the keg for a few hours, but then you should rinse with clean water.