Brewtools brewing machines – B25 to B180 with accessories and parts
Here you will find Brewtools brewing machines with accessories and spare parts. Brewtools is a Norwegian brand of brewing equipment. The current models are the B25, B50, B100 and B180, which replace the B40pro, B80pro and B150pro. This page also gathers Trubinator filters, the steam condenser, Troll brewing tables and original parts for the discontinued models.
To see the whole brand, including Unitank and MiniUni tanks, go to Brewtools.
Brewtools brewing machines compared
Model
Volume
Power
Features
B25
25 litres pre-boil
230 V, 2 kW
Tabletop model with flat bottom
B50
50 litres pre-boil
230 V, 3.3 kW
10° conical bottom
B100
100 litres pre-boil
2 × 230 V, 6 kW
Can be extended with the B100 mash tun
B180
Batches of 30–180 litres
2 × 230 V, 6.6 kW
Up to 45 kg of grain, 10° conical bottom
The B25 and B50 run on a standard 230 V circuit and suit homebrewers. The B100 and B180 need two separate 230 V circuits and are made for experienced brewers, brewing clubs and small breweries.
Accessories for your Brewtools brewing machine
Clearer wort: the Trubinator in sizes S, M and L gathers hops and grain debris in the centre of the filter during whirlpool. The Trubinator M is 420 mm across and fits the B80pro.
Overflow: the Universal overflow pipe kit prevents dry running and stops the mash from overflowing. It adjusts from roughly half a batch to a full malt pipe and fits all Brewtools machines.
Steam: the Brewtools steam condenser condenses steam with a water spray, as an alternative to extraction. It mounts on the exhaust hood.
Tri-Clamp and CIP: three-way ball valves, 3" and 4" CIP adapters, an inline oxygenation kit and caps in 1.5", 2", 3" and 4".
Spare parts for the B40pro, B80pro and B150pro
We stock original parts for the discontinued machines: heating elements and gasket kits, laser-cut, fine mesh and coarse mesh filters, sparge and recirculation manifolds, exhaust hoods, insulation jackets, lid gaskets, dip tubes, O-rings, temperature sensors and accessory packs for 2, 3 or 4-valve setups.
Frequently asked questions about Brewtools brewing machines
What happened to the B40pro, B80pro and B150pro?
They have been discontinued and replaced by the B25, B50, B100 and B180. You can still get original spare parts for them here, including heating elements, filters and gaskets.
Which Brewtools brewing machine suits homebrewing?
The B25 and B50 run on standard 230 V. The B25 is a compact tabletop model for around 25 litres pre-boil, while the B50 has a conical bottom and twice the volume. The B100 and B180 need two 230 V circuits.
Do I need a steam condenser or extraction?
If you boil indoors, you need one or the other. The steam condenser cools the steam into liquid that drains to a floor drain or bucket, with no fan or ducting. The supplied nozzle uses 1.1 litres of water per minute at 4 bar.
How does this page differ from the Brewtools brand page?
This page shows the brewing machines with accessories and spare parts. The Brewtools brand page shows everything from the brand, including Unitank, MiniUni and Brite tanks.
