Solenoid valve, TC34mm, NC, DC24V - Brewtools

Solenoid valve TC34 mm, NC, 24 V DC – from Brewtools

A stainless steel solenoid valve from Brewtools, designed for glycol, water and air/CO2. The valve has 34 mm Tri-Clamp ports at both ends, which gives great flexibility in your setup. It is normally closed (NC), meaning it is shut without power and opens when the coil receives 24 V DC. It can, for example, be used to control glycol or cooling water to a fermenter.

Features

• TC34 mm ports at both ends
• Coil and plunger from the Italian company ACL
• The whole valve is easy to take apart and clean
• The coil has a DIN 43650 type A connection. The DIN plug is not included.
• Often used with leak-free quick couplings on one or both sides, depending on the setup

Technical data

• Ports: TC34 mm / TC34 mm
• Operation: NC (normally closed)
• Power supply: 24 V DC, 10 W
• Orifice: Ø4.5 mm
• Pressure: max 3 bar / 43 PSI

Frequently asked questions about the Brewtools TC34 mm solenoid valve

What does NC mean on a solenoid valve?

NC stands for normally closed. The valve is shut when the coil has no power and opens when it receives 24 V DC.

Can I plug the valve straight into a wall socket?

No. The coil runs on 24 V DC and 10 W, so it needs a 24 V DC power supply or controller. The coil has a DIN 43650 type A connection, and the DIN plug is not included.

What pressure can the valve handle?

The valve is rated for max 3 bar (43 PSI).

What can the valve be used for?

It is designed for glycol, water and air/CO2, for example to control coolant to a tank.

Related

• Brewtools
• Brewtools shut-off coupling, female to 3/8" NPT
• Brewtools shut-off coupling, male elbow to 10 mm barb
• 34 mm Tri-Clamp clamp
• 34 mm Tri-Clamp silicone gasket