AEB corny kegs – ball lock Cornelius kegs from 9 to 23 litres
Here you will find stainless steel Cornelius kegs from AEB in Italy in 9, 12, 19, 20 and 23 litre sizes, all with ball lock posts. The 20-litre keg is made exclusively for Brewshop. The kegs come complete with lid, pressure relief valve, in and out posts, dip tube and gas tube. Brewshop is the Norwegian distributor for AEB and stocks spare parts for every size.
How to choose the right corny keg
23 litres holds a full batch from a 25-litre brew, so you no longer bottle the last 2–3 litres. The keg is 67 cm tall and 23 cm in diameter.
20 litres is made exclusively for Brewshop and holds one litre more than a standard 19-litre keg. Height 66.5 cm, diameter 22 cm.
19 litres is the standard corny keg size. The KegMaster XL kegerator from Keg King holds four 19-litre kegs.
9 and 12 litres suit smaller batches, test brews and transport.
The 9, 12, 19 and 20 litre kegs are 219 mm in diameter including the rubber rings. Packs of three kegs are available in 19, 20 and 23 litres.
Keg
Spare parts
9, 12, 19 and 20 litres
Shared posts, O-rings and gas tube. Dip tube per size
23 litres
Dedicated posts, dip tube, gas tube and O-rings. Same lid as 9–20 litres
Using Cornelius kegs
A corny keg can be filled straight from the fermenter. Fit the lid, purge with CO2 to remove oxygen and pressurise. You set carbonation with the pressure: if the beer is too flat, raise the pressure, and if it is over-carbonated, release some CO2. You clean one keg instead of 40–50 bottles, and the kegs are easy to take apart for cleaning and sanitising.
If something breaks, we stock AEB seals, dip tubes, pressure relief valves, lids and in and out posts for each size.
Quality from AEB
For more than 30 years AEB has made Cornelius kegs in Italy for companies such as Coca-Cola and Pepsi. The kegs are passivated to make the steel resistant to corrosion and chemical attack, individually inspected during production, cleaned and pressure tested to 130 PSI / 9.1 bar. Each keg has a unique serial number. AEB kegs have more rubber at the top and bottom, which protects the steel if dropped.
The AEB collection also includes stainless steel drip trays, the Mini Jolly 5L cleaning keg for KeyKeg couplers and Python lines for draught systems.
Frequently asked questions about corny kegs
Which corny keg size should I choose?
If you brew 25 litres, the 23-litre keg holds the whole batch. For batches around 20 litres, choose 19 or 20 litres, while 9 and 12 litres suit small batches and draught beer on the go.
Do 19-litre keg spare parts fit the 23-litre keg?
No. The 23-litre keg uses its own posts, dip tube and O-rings. Only the lid is shared with the 9–20 litre kegs.
Can I use Star San in a corny keg?
Yes, but do not leave it standing. Acid sanitisers containing phosphoric acid can weaken the passive layer of the steel over time. Leave the solution for a few hours at most, then rinse with clean water.
How much pressure can an AEB corny keg take?
All AEB kegs are pressure tested to 130 PSI, which equals 9.1 bar.
Which disconnects fit AEB kegs?
The kegs have ball lock posts and use ball lock disconnects for beer and gas. You will find them under keg couplers and accessories.
Related equipment
Kegs and CO2 – keg packs, CO2 cylinders and regulators.
Oxyturbo – CO2 regulators for carbonating in the keg.
Kegerators – fridges with tap towers for corny kegs.