Description
Brewiks Micro Brewery 200, 300 and 500 – brewing system for microbreweries
The Brewiks 200, 300 and 500 Micro Brewery are brewing systems for large brewing clubs, small and growing breweries, and as pilot systems for experimental recipes. All processes are controlled by the brewer with an industrial-grade PLC.
Please note: This product is only available in Norway.
Brewiks is built on the "plug and brew" principle. No special installation is needed, and the system consists of two units on wheels that together work as mash tun, lauter tun, kettle and whirlpool. The system is made to order, with price on request.
Features
- Agitator system that gives up to 90–95% efficiency on all models
- Built-in sparging system with a heat exchanger that uses the system's energy to heat sparge water, as an alternative to a separate hot liquor tank
- Built-in heat exchanger for wort cooling in the double wall, with little need for maintenance
- Wheels and flexible hoses make it easy to move the units and store them when not in use
- Made from AISI 304/316 stainless steel, CE certified
- Supplied for 400 V as standard, and also available for 230 V three-phase
Capacity
The model numbers 200, 300 and 500 refer to the volume of finished beer at 9% ABV (OG above 1.100) that can be brewed in the system. Maximum volume of cooled wort per system:
- Brewiks 200: 210 litres
- Brewiks 300: 420 litres
- Brewiks 500: 620 litres
Mash tun
- For mashing and boiling
- 7" touch-screen PLC controller
- Electrical installation
- Sanitary pump
- Steam condenser with silicone seal and drain pipe
- Heat exchanger for heating sparge water
- Heat exchanger for cooling, with hot water recovery
- 40 mm double walls, insulated with rock wool
- Valves and fittings included
- Stand with wheels
Lauter tun
- Lautering
- Whirlpool
- Spray nozzle for sparging
- Valves and fittings included
- Stand with wheels
- Set of sanitary hoses, 5 m, 3 m and 2 m, with sanitary fittings
Technical data

Read more on the Brewiks website.
Frequently asked questions about the Brewiks Micro Brewery
What do the numbers 200, 300 and 500 mean?
They refer to the volume of finished beer at 9% ABV (OG above 1.100) that can be brewed in the system. Maximum cooled wort volume is 210, 420 and 620 litres.
Do I need special installation?
No. Brewiks is built on the "plug and brew" principle. The system is supplied for 400 V as standard and is also available for 230 V three-phase.
Do I need a separate hot liquor tank?
Not necessarily. The built-in heat exchanger uses the system's energy to heat the sparge water, as an alternative to a separate hot liquor tank.
How do I order?
Brewiks is made to order with price on request. Contact us for a quote.





