CO2 T-piece 1/4"

CO2 tee 1/4" – splits the CO2 line to two kegs

Tee piece in 304 stainless steel that splits one CO2 line in two, for example from the regulator to two kegs. The barbs are 1/4" and fit braided CO2 hose with both 1/4" and 5/16" inside diameter (ID). The hoses are secured on the barbs with hose clamps.

Technical data

• Type: tee with three hose barbs
• Barb size: 1/4"
• Fits: braided CO2 hose with 1/4" and 5/16" ID
• Material: 304 stainless steel

Frequently asked questions about the CO2 tee 1/4"

Which hose fits?

Braided CO2 hose with 1/4" or 5/16" inside diameter. Secure the hose with a hose clamp on each barb.

Do both kegs get the same pressure?

Yes. A tee only splits the line, so both kegs get the pressure the regulator is set to. For different pressures you need a regulator with several pressure outlets.

Can beer back up into the CO2 line?

It can if the keg is filled above the gas dip tube and the CO2 cylinder runs empty. Do not fill above the gas tube, and consider a check valve.

Related

• Keg fittings and accessories
• CO2 hose kit with braided hose 5/16" ID – ball lock
• CO2 manifold – two outlets
• Check valve
• How to carbonate beer in a keg