Speidel 20L #Braumeister PLUS

Speidel 20L #Braumeister PLUS

The Braumeister just got even better. The new #Braumeister PLUS features a new control unit with more functions, centralized temperature control, and an external cooling jacket for cooling after boiling and for temperature control during fermentation if you wish to use the machine as a fermentation tank. This requires the Fermentation Kit, which is a tight-fitting lid for fermentation. It is even possible to automatically cool the wort after boiling (requires the solenoid valve sold separately).

With the new automatic control system, you brew with your own individual recipes and are easily guided through the brewing process. Recipes and software updates can be automatically synchronized with integrated WIFI (no separate WIFI module is needed anymore).

Time and temperature are accurately maintained throughout all brewing phases with the temperature sensor, which is located in the center rod where it matters most - in the middle of the malt! Thanks to the patented malt pipe technology, the wort is gently and practically circulated. The #Braumeister PLUS is available with a capacity of 20 or 50 liters. To drain wastewater, an additional drain valve is installed at the bottom of the tank, facilitating very easy cleaning.

With integrated fermentation control, you can also use the machine as a temperature-controlled fermentation tank. After brewing, transfer clean wort to an intermediate station (bucket/tank), clean the machine, and transfer the wort back into the machine. Put on the lid with an airlock (See Fermentation Kit sold separately), connect Speidel's solenoid valve (sold separately) to open/close the cooling water, and you're ready for temperature-controlled fermentation managed from the control panel - all in one machine!

For temperature control during fermentation only, you just need to connect a hose directly from the tap to the solenoid valve, and the machine will manage the rest. For cold crashing, you will need a glycol chiller. Such a chiller is also practical for speeding up the cooling of the wort after boiling.

• New control system with touch screen, integrated brewing guide, and Wifi for automatic software updates and recipe synchronization
• Made of stainless steel
• Cooling jacket for easy and hygienic water cooling
• Volume: 20L finished beer = approx. 23L wort
• Max. malt quantity 6 kg
• Extra drain valve at the bottom
• Note: The use of the cooling jacket on the PLUS does not work properly with a short malt pipe and half the amount of wort

Advantages

General:

• Patented malt pipe system from bottom to top against gravity for efficient and gentle circulation through the malt, no external pipes
• Pump Break - every 10 minutes the pump pauses during mashing, allowing the malt bed to settle before the pump reactivates. This way, the liquid finds new paths through the mash, and you achieve higher yields.
• Hygienic cooling with water through the welded cooling jacket (no cooling coil needed)
• Easy cleaning with an extra bottom valve on the PLUS, smooth welds, 3D surface, and easy pump cleaning by simply opening the pump
• Service-friendly design: all connections to pump, control, and sensor are screwed on and therefore quick and easy to replace if necessary
• Braumeister stays up to date with software updates via integrated Wifi

Software:

• Brewing guide - also shows quantities and types of raw materials
• Precise temperature measurement
• Help information during the brewing process
• Adjustable pump pauses
• Integrated Wifi for software updates and recipe synchronization with MySpeidel
• Integrated raw material database
• Timer function - for delayed brewing start
• Option for additional accessories for automatic cooling
• Fermentation control for the possibility to ferment in the Braumeister
• Fermentation control allows data from Tilt
• The machine can also be remotely controlled (requires MySpeidel Plus subscription)

Hardware:

• IP 65 water-resistant
• 5" touch screen
• Temp-sensor inside the center rod in the middle of the malt
• Extra 24V and CAN connections for future accessories
• Integrated Wifi and Bluetooth

Technical details

• Effective weight: 19 kg
• 2000W heating element
• Pump: 1x 27 W - adjustable speed
• Power supply connection: 230 V (fuse protection min. 10 A)
• Control system: fully automatic brew control (temperature, time, pump)
• Max malt quantity: 6 kg
• Welded double jacket for cooling
• 1" BSP connections for jacket. 2 Gardena connectors included
• Extra 3/4" drain tap at the bottom

Dimensions

• Height: 60 cm
• Diameter: 40 cm
• Shipping weight: 24 kg

See presentation of the new #Braumeister PLUS

The item is too large/heavy to be sent as a package, and must therefore be sent on a pallet.