Speidel 50L #Braumeister PLUS

Speidel 50L #Braumeister PLUS

The Braumeister has gotten even better. The new #Braumeister PLUS features a new control unit with more functions, centralized temperature control, and an external cooling jacket for cooling after boiling and for temperature control during fermentation if you wish to use the machine as a fermentation tank. This requires the additional Fermentation Kit, which is a tight-fitting lid for fermentation. It is even possible to have automatic wort cooling after boiling (requires the solenoid valve sold separately).

With the new automatic control system, you brew with your own individual recipes and are guided simply through the brewing process. Recipes and software updates can be automatically synchronized with integrated WIFI (no separate WIFI module is required anymore).

The time and temperature are maintained precisely throughout all brewing phases with the temperature sensor, which is located in the central rod where it matters most - in the middle of the malt! Thanks to the patented malt pipe technology, the wort is circulated gently and practically. The #Braumeister PLUS is available with a capacity of 20 or 50 liters. To drain wastewater, an additional drain valve is mounted at the bottom of the tank, facilitating very easy cleaning.

With integrated fermentation control, you can also use the machine as a temperature-controlled fermentation tank. After brewing, transfer clear wort to an intermediate station (bucket/tank), clean the machine, and transfer the wort back into the machine. Install the lid with airlock (See Fermentation Kit sold separately), connect Speidel's solenoid valve (sold separately) to open/close the cooling water, and you are ready for temperature-controlled fermentation managed from the control panel - in one and the same machine!

For temperature control during fermentation only, you simply need to connect a hose directly from the tap to the solenoid valve, and the machine will manage the rest. For cold crashing, you will need a glycol chiller. Such a chiller is also practical for speeding up wort cooling after boiling.

• New control system with touch screen, integrated brewing guide, and Wifi for automatic software updates and recipe synchronization
• Made of stainless steel
• Cooling jacket for simple and hygienic water cooling
• Volume: 50L finished beer = approx. 55L wort
• Max. malt quantity 13 kg
• Extra drain valve at the bottom
• Note: The use of the cooling jacket on the PLUS does not work properly with a short malt pipe and half the amount of wort

Advantages

General:

• Patented malt pipe system from bottom to top against gravity for efficient and gentle circulation through the malt, no external pipes
• Pump Break - every 10 minutes the pump pauses during mashing, allowing the malt bed to settle before the pump reactivates. This way, the liquid finds new paths through the mash, and you achieve higher efficiency.
• Hygienic water cooling through the welded cooling jacket (no cooling coil necessary)
• Easy cleaning with an extra bottom valve on the PLUS, smooth welds, 3D surface, and simple pump cleaning by easy opening of the pump
• Service-friendly design: all connections to pump, control, and sensor are screwed and therefore quick and easy to replace if necessary
• Braumeister stays updated with software updates via integrated Wifi

Software:

• Brewing guide - also shows quantity and type of raw materials
• Exact temperature measurement
• Help information in the brewing process
• Adjustable pump pauses
• Integrated Wifi for software updates and recipe synchronization with MySpeidel
• Integrated database of raw materials
• Timer function - for delayed brewing start
• Possibility for additional accessories for automatic cooling
• Fermentation control for the option to ferment in the Braumeister
• Fermentation control allows data from Tilt
• The machine can also be remotely controlled (requires MySpeidel Plus subscription)

Hardware:

• IP 65 water resistant
• 5" touch screen
• Temp-sensor inside the central rod in the middle of the malt
• Additional 24V and CAN connections for future accessories
• Integrated Wifi and Bluetooth

Technical details

• Effective weight: 30 kg
• 3200W heating element
• Pump: 1x 27 W - adjustable speed
• Power supply connection: 230 V (fuse protection min. 16 A)
• Control system: fully automatic brewing control (temperature, time, pump)
• Max malt quantity: 13 kg
• Welded double jacket for cooling
• 1" BSP connections to jacket. 2 Gardena connectors included
• Extra 3/4" drain tap at the bottom

Dimensions

• Height: 70 cm
• Diameter: 50 cm
• Shipping weight: 37 kg (+ pallet)

The item is too large/heavy to be sent as a service package and is therefore shipped on a pallet.

See presentation of the new #Braumeister PLUS