Starter kit for dispensing from KeyKeg & PolyKeg with Lindr - For 2 kegs

Starter kit for dispensing from KeyKeg & PolyKeg with Lindr – for two kegs

This starter kit contains what you need to dispense from two KeyKeg or PolyKeg kegs with a Lindr cooler with a built-in compressor. The couplers fit both KeyKeg and PolyKeg, and the air from the Lindr compressor is split to both kegs with a T-piece.

Contents

• 2 × KeyKeg dispensing kit (couplers that fit both KeyKeg and PolyKeg)
• 2 × John Guest F 5/8" BSP to 3/8" for the beer outlet on the KeyKeg coupler
• 2 × John Guest F 5/8" BSP to 5/16" for the air inlet on the KeyKeg coupler
• 1 × John Guest 5/16" T-piece to split the air from the Lindr to two kegs
• 4 metres of 3/8" LLDPE tubing for beer
• 4 metres of 5/16" LLDPE tubing for air

Frequently asked questions about the KeyKeg and PolyKeg starter kit

Which Lindr coolers does the kit fit?

The kit is made for Lindr coolers with a built-in air compressor, such as the Lindr KONTAKT 40/K Profi. The compressor pushes air in between the keg and the bag, so the beer is pressed out without the air touching it.

Can I use the kit with Cornelius kegs?

No. A Lindr with compressor is for PolyKeg and KeyKeg with an inner bag, not for Cornelius kegs. Cornelius kegs are dispensed with CO2.

What does the T-piece do?

The T-piece splits the air line from the Lindr in two, so the compressor can pressurise both kegs at the same time.

Related

• Lindr dispensing coolers
• Lindr KONTAKT 40/K NEW Profi with compressor
• KeyKeg Dispensing Head 5/8 – coupler
• KeyKeg
• Dispensing beer from kegs