1.5" Tri-Clamp Inline Filter Long (35cm)

1.5" Tri-Clamp inline filter, long (35 cm) – two-stage stainless steel filter

A professional inline filter in polished 304 stainless steel with a 1.5" Tri-Clamp connection. The main filter has 1 mm holes, and on the outside sits a removable secondary 100 mesh filter (149 micron). The secondary filter is pulled over the main filter when you need extra fine filtration.

The filter is fitted between the pump and the plate or counterflow chiller, so hops and particles are stopped before they reach the chiller. Homebrewers can also use it as a hop back to add hop aroma. The filter has a volume of 1 litre.

Features

• Filters in two stages: 1 mm perforated main filter and removable 100 mesh filter.
• Fitted between the pump and a plate or counterflow chiller.
• Can be used as a hop back.
• Easy to clean.

Technical data

• Material: polished 304 stainless steel
• Filter: 1 mm holes and 100 mesh / 149 micron screen
• Outer length of housing: 35 cm
• Filter length: 27 cm
• Filter diameter: 7 cm
• Volume: 1 litre
• Connection: 1.5" Tri-Clamp
• Max pressure: 10 bar

Frequently asked questions about the 1.5" Tri-Clamp inline filter, long

Where should the filter be fitted?

Between the pump and the plate or counterflow chiller. Hops and particles are then stopped before they can clog the chiller.

Can I use it as a hop back?

Yes. The filter holds 1 litre, and you can fill it with hops to give the wort hop aroma on its way to the chiller.

Are finer filters available?

Yes. The secondary filter can be replaced, and spare filters are available in other mesh sizes, including 300 mesh and 600 mesh.

Related

• Tri-Clamp
• 1.5" Tri-Clamp inline filter, short (24.5 cm)
• 100 mesh / 150 micron filter for inline filter, long
• 300 mesh / 50 micron filter for inline filter, long
• 600 mesh / 20 micron filter for inline filter