Brewtools B80pro Brewing Machine (Display Model)

Brewtools B80pro brewing system

The Brewtools B80pro is a high-end brewing system for homebrewers, designed and manufactured here in Norway!

• 30-80 liter boil volume
• 20 kg malt capacity
• 7-inch touch screen
• Two sensors for accurate temperature control
• Conical bottom
• Easy to clean

The Brewtools B80pro is a brewing system designed for true enthusiasts. From the control panel, a 7-inch touch screen, you have full control over the brewing system through a simple and intuitive interface.

For example, you can steplessly adjust the pump that recirculates the wort or use one of the many recipes that automate the entire brewing process.

This beer brewer from Brewtools has a total capacity of 90 liters and a 20 kg malt capacity. 2x3kW heating elements provide rapid heating and boiling, and two digital sensors ensure it is highly accurate. A conical bottom and bottom draining make cleaning simple and straightforward.

Brewtools brewing systems are produced by Apparatus in Grimstad, by people who know exactly what eager brewers need!

If you're looking for something not quite as large, you can take a look at the smaller model Brewtools B40pro, which has a 40-liter boil volume and the same great qualities.

Brewtools B80pro gives you full temperature control

One of the digital temperature sensors is attached to the bottom, and the other to the pump circuit. The maximum static deviation of the sensors is ±0.5°C. You can also calibrate the sensors individually to achieve maximum accuracy. The sensors have an accuracy of 0.1°C. It is also possible to connect a third temperature sensor from Brewtools to monitor return wort after cooling.

With powerful heating elements totaling 6kW (230V), you ensure rapid heating. During boiling, PID temperature control is deactivated, and you can steplessly adjust heating power for full control of the boil. The Brewtool B80pro can be set to a maximum power of 10A, 13A, or 16A, so that maximum power never exceeds the fuse on the circuit you are using.

Easy cleaning of the B80pro

Brewtools has made the B80pro easy to clean by ensuring that all connections, including the pump, are attached with sanitary tri-clamp connections. The malt pipe has hooks that fold out when lifted, allowing it to be lifted with both hands.

Rinsing takes place without pipes and hoses outside the kettle. A pipe that is placed over the center pipe comes up with the malt basket, and simultaneously lifts the sprayer hat so that you can rinse from an external water tank.

All Brewtools brewing systems also have a conical bottom. This means you don't have to turn the machine upside down when cleaning it. Just unscrew the pipe in the middle, and you can easily clean with a brush or sponge. When you rinse, all the liquid will drain into the drain in the middle of the machine. Straight into a bucket or a drain, depending on what you have access to!

All outlets are 34mm tri-clamp connections for maximum flexibility, without leaks. As standard, a 3-way valve is supplied on the right side for circulation and draining. In addition, a 3-way valve is located at the bottom of the kettle for the pump circuit and draining/cooling. All hoses are food-grade silicone hoses with dimensions of 16x25mm.

The control unit is specially developed and has high-quality electronics. The software is under continuous development and more useful functions are constantly being added!

Specifications:

Physical size: 64 (h) x 60 (w) x 60 (d) cm (total size with flanges)
Weight: 25.5 kg (30.5 kg with packaging and included accessories)
Tank size: Ø50 cm, Height 46cm
Volume: 90 liters (recommended max boil volume – 80 liters)
Malt capacity: 20 kg (58 l)
Construction material: 1.0mm stainless steel (SS304)
Heating element: 230V, 6000W (2x3000W)
Pump: 24V brushless, Max 25 l/min, stainless steel head, stepless control via touch panel
Control unit: ARM Cortex M4 180mhz, 7″ Touch 800×480
Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD
Hoses: 19x25mm Silicone, Food-grade

Included in the box:

• Complete kettle with control unit, pump, bottom sensor, heating elements and lid
• Malt pipe with handle and fold-out hooks
• 1 pc filter in expanded metal
• 1 pc 3-way valve
• Temperature sensor with adapter for pump circuit
• 5 pcs TC 34mm clamps with gaskets (All are used to cover standard setup)
• 3 pcs TC 34mm blank plugs
• 1 pc dip tube, short type
• 1 pc Mash hat for wort spreading
• 1 pc Rinsing tube
• 150 cm 16x25mm silicone hose
• 1 pc TC 34mm to 19mm hose adapter
• O-rings for center tube and dip tube
• Power cable, 2 meters (2 pcs)