Brewtools F100 Unitank

Brewtools F100 Unitank

Brewtools' Unitanks have finally been launched! These are professional fermenters for ambitious home brewers, brewing teams, and small breweries. Optimal for fermentation, clarification, and carbonation, all in one tank.

In true Brewtools spirit, Apparatus has explored new techniques and ways to solve challenges.
This has resulted in a series of fermenters with new features and many expansion possibilities.

The F100 has a gross volume of 100 liters, with a recommended working volume of 90 liters.
Brewtools Unitanks are approved for operating pressures up to 2.0 Bar (30 PSI) and are manufactured from 1.5mm stainless steel.
The stand is adjustable so that the distance from the bottom valve to the floor can be increased.
The cooling jacket located in the vertical wall ensures efficient cooling. 34mm TC.

If you want to learn more about pressure fermentation, we recommend our blog post which provides a simple introduction to the topic.

Key features:

- PureBlast™ surface internally and externally which eliminates the need for waxes and polishing agents and does not require passivation.
- Cooling jacket in the vertical wall provides efficient cooling without compromising easy cleaning.
- Ample connection options for sensors, heating elements, carbonation, and other accessories.
- Pressure approved for 2 bar / 30 PSI.
- 8" TC port on top for easy access
- 2" dump and racking valve.

Specifications:

- Lowest height (w/o accessories): 102 cm
- Highest height (w/o accessories): 122 cm
- Packaging size: 107 (h) x 60 (w) x 60 (d) cm
- Total weight without packaging: 47.8 kg
- Total weight with packaging: 53.1 kg
- Tank diameter (internal): Ø50 cm
- Gross volume: 100 liters
- Max recommended working volume: 90 liters
- Minimum recommended working volume: 45 liters
- Conical section volume: 24 liters
- Tank material: 1.5mm stainless steel (SS304)
- Max pressure: 2.0 bar / 30 PSI

The item is too large/heavy to be sent as a service package, and is therefore sent on a pallet.

Brewtools Unitanks are supplied with the following equipment:

- Unitank and height-adjustable stand
- 1 pc Analog Gauge, Pressure, TC34mm
- 2 pcs Butterfly valve, 2"
- 1 pc Butterfly valve, 34mm DN20
- 1 pc Blow-off tube
- 1 pc Racking arm 2"
- 1 pc TC elbow 90°, 2"
- 1 pc Insulation jacket in black neoprene
- 1 pc Sample valve, 34mm
- 1 pc TC Adapter 8"-4"
- 1 pc TC blind cap, 4"
- 1 pc TC blind cap 2"
- 2 pcs TC blind cap 1.5"
- 3 pcs TC blind cap 34mm
- 2 pcs TC gasket 8" w/lip
- 2 pcs TC gasket 4"
- 2 pcs TC gasket 2" 5-pack
- 1 pc TC gasket 1.5" 5-pack
- 3 pcs TC gasket 34mm 5-pack
- 1 pc Tri Clamp 8"
- 1 pc Tri Clamp 4"
- 5 pcs Tri Clamp 2"
- 2 pcs Tri Clamp 1.5"
- 10 pcs Tri Clamp 34mm
- 1 pc TC tool
- 4 pcs M10 steel/rubber feet
- 1 pc TC34mm Safety valve (2 bar)
- Necessary bolts and parts for assembly

Accessory tips depending on use may include;
Brewtools HopDrop kit, Thermowell for sensor, Ball-Lock for 34mm for CO2 filling, Carbonation stone with Ball-Lock, Coil for sample valve, Spunding valve, Hose connectors and hoses for filling and emptying, 2" sight glass, etc.

Brewtools Unitanks are designed and manufactured with a high focus on quality.
They are tested and approved according to the requirements of PED 2014/68/EU by an independent party.

NB: The model pictured is a prototype. Minor changes and improvements may occur.