Einbrew 3.2kW Heating Element for Brew Kettle (32cm) - 1" BSP

Einbrew 3.2 kW heating element for brew kettles – 32 cm, 1" BSP

Heating element from Einbrew for fitting in a brew kettle. The element delivers 3.2 kW at 230 V, has a 1" BSP connection and extends 32 cm into the kettle. It is made of 316 stainless steel and has a low watt density of 8.5 W/cm². Low watt density means the heat is spread over a larger surface, which reduces the risk of wort scorching on the element.

The element comes complete with silicone gasket, washer and nut. It may only be installed by a registered electrical installation company.

Technical data

• Power: 3.2 kW
• Voltage: 230 V
• Connection: 1" BSP
• Hole diameter in kettle: 33 mm
• Internal length: 32 cm
• Total length of the element itself: approx. 1.5 metres
• Watt density: 8.5 W/cm²
• Material: 316 stainless steel
• Supplied with silicone gasket, washer and nut

Frequently asked questions about the Einbrew heating element

What size hole do I need in the kettle?

The element requires a 33 mm diameter hole in the kettle.

Why is low watt density an advantage?

With low watt density, the surface of the element runs cooler for the same power. That means less risk of the wort scorching.

Can I install the element myself?

No. The element may only be installed by a registered electrical installation company.

Related

• Homebrewing equipment
• PT100 temperature sensor 50 mm (Einbrew)
• Brewing methods and brewing machines