Pushfit CO2 Hose Kit with 5/16" LDPE Blue Striped Hose - Ball Lock

Push-fit CO2 tubing kit for Cornelius kegs – 5/16" LDPE tubing with ball lock

This tubing kit is made for quick and secure connection to the Oxyturbo CO2 regulators, which come with a 5/16" push-fit connection. Push the tubing into the regulator, attach the ball lock disconnect to the keg and you are ready to carbonate and serve. The kit fits Cornelius kegs with ball lock posts.

Contents

• 1.2 metres of LDPE tubing with 5/16" outer diameter (blue stripe), flexible, from Lindr
• Low Profile ball lock CO2 disconnect, threaded
• DMfit push-fit adapter 5/16" – 1/4" FFL

How to use the tubing kit

1. Push the tubing end all the way into the push-fit connector on the regulator.
2. Attach the ball lock disconnect to the gas post on the keg. The post marked «in» is gas in.
3. Set the desired pressure on the regulator.

Frequently asked questions about the push-fit CO2 tubing kit

Which regulators does the tubing kit fit?

The kit is made for regulators with a 5/16" push-fit connection, such as the Oxyturbo CO2 regulators.

How long is the tubing?

The tubing is 1.2 metres long with a 5/16" outer diameter.

Which post on the keg does the CO2 disconnect go on?

CO2 connects to the gas post, marked «in». Do not fill the keg above the gas dip tube, or beer can flow back towards the regulator if the CO2 cylinder runs empty.

Related

• Keg fittings and accessories
• Oxyturbo Major CO2 regulator
• Oxyturbo Minimal CO2 regulator for SodaStream
• 5/16" LDPE tubing (blue stripe) by the metre
• How to carbonate beer in a keg