Starter Package for Dispensing from KeyKeg & PolyKeg with Lindr - For 1 keg

Starter kit for dispensing from KeyKeg and PolyKeg with Lindr – for one keg

This starter kit has what you need to connect one KeyKeg or PolyKeg to a Lindr tap tower with cooling and an air compressor. It contains a keg coupler, push-fit quick connectors and tubing for both beer and air, so you can start dispensing straight away.

Contents

• 1 × KeyKeg dispensing kit (coupler that fits both KeyKeg and PolyKeg)
• 1 × push-fit quick connector F 5/8" BSP to 3/8", for the beer outlet on the KeyKeg coupler
• 1 × push-fit quick connector F 5/8" BSP to 5/16", for the air inlet on the KeyKeg coupler
• 2 metres of 3/8" LLDPE tubing for beer
• 2 metres of 5/16" LLDPE tubing for air

How it works

Lindr towers with a compressor use compressed air instead of CO2. The air is pushed in between the keg wall and the bag or inner container in KeyKeg and PolyKeg, so it never touches the beer. The beer runs from the coupler through the 3/8" tubing to the tower, and air from the compressor runs through the 5/16" tubing to the coupler.

Frequently asked questions about the KeyKeg and PolyKeg starter kit for Lindr

Which kegs does the kit fit?

The coupler fits KeyKeg and PolyKeg with a KeyKeg-compatible valve. The kit is intended for one keg.

Can I use the kit with Cornelius kegs?

No. The air compressor in Lindr should only be used with PolyKeg and KeyKeg, not with Cornelius kegs.

Which tap tower do I need?

The kit is made for Lindr tap towers with cooling and a built-in air compressor.

Is the tubing long enough?

The kit includes 2 metres of beer tubing and 2 metres of air tubing. If you need longer runs, 3/8" and 5/16" tubing is also sold separately.

Related

• Lindr tap towers
• KeyKeg Dispensing Head 5/8 coupler
• PolyKeg PRO 20L with bag, K valve
• Beer/air tubing LLDPE 3/8"
• Beer/air tubing LLDPE 5/16"