Description
Tapcooler Nanocanner IM – can filler for closed purging and filling of beer cans
The Tapcooler Nanocanner™ IM is the can filling attachment for purging and closed filling of beer cans with the Tapcooler Counter Pressure Filler. It fits any cans with 202 ends, regular and sleek, of any height. The upper rim of the can is clamped to the silicone seal of the Nanocanner, and with its 1.5 bar pressure rating you can fill the can with the back pressure you want.
How the Nanocanner works
The Nanocanner has a lifting ring attached to the can holder housing. When the lever is pushed to the left, the can is pressed up against the silicone seal and held tight for closed purging and filling. Only push the lifting ring until you feel resistance. Pushing too hard can damage the rim of the can.
Extend the telescopic tube of the counter pressure filler to purge the can and fill from the bottom. We recommend purging through the pressure relief valve, with the can connected to the Nanocanner.
A bracket is not included. Choose between a wall bracket for a fixed setup or a magnetic bracket for quick setup on a fridge door. The brackets interlink to make a dual, triple or quadruple head can filler.
Additional items required (not included)
- Tapcooler Counter Pressure Filler
- Tapcooler Beer Valve Connector Tube, or Tapcooler Extension Tube if filling from taps
- We also recommend the Tapcooler Drain Tube
Technical data
- Fits: beer cans with 202 ends, regular and sleek, any height
- Pressure rating: 1.5 bar
- Seal: silicone seal against the upper rim of the can
- Bracket: not included
Easy installation:
Frequently asked questions about the Tapcooler Nanocanner
What do I need to use the Nanocanner?
You need the Tapcooler Counter Pressure Filler and either the Tapcooler Beer Valve Connector Tube or the Extension Tube if you fill from a tap. You also need a bracket.
Which cans fit?
The Nanocanner fits all beer cans with 202 ends, both regular and sleek cans, of any height.
Is a bracket included?
No. Choose between a wall bracket and a magnetic bracket. The brackets interlink to make a can filler with two, three or four heads.
Does the Nanocanner seal the can?
No. The Nanocanner purges and fills the can. The lid must be seamed on with a separate can seamer.
Related
Betaling
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.