Description
Sparge Arm by Ss Brewtech – even and gentle sparging of the grain
The Sparge Arm by Ss Brewtech spreads the sparge water evenly over the grain bed during continuous sparging (fly sparge). The arm mounts on the handle of the Ss Brewtech Infusion Mash Tun, and also fits Project Brew kettles and other kettles with the same type of handle. Height and flow rate are adjustable for a calm, controlled sparge.
Please note: This product is only available in Norway.
Features
- Adjustable nozzle height above the grain bed
- Three different silicone flow discs included, so you can choose a suitable flow rate
- Flow rate can be fine-tuned by tightening the nozzle
- Mounts on the kettle handle with a silicone ring and silicone mount
- Connects to the hot liquor tank with 3/8" (10 mm) ID vinyl or silicone tubing
How to use the Sparge Arm
Ss Brewtech recommends recirculating the wort (vorlauf) until it runs clear, then adding sparge water as fast as the wort is drawn off, keeping about 2.5 cm of liquid above the grain bed. Place the nozzle 10–15 cm above the grain bed. Sparging can be done by gravity or with a small pump and flow control valve. A test run with water before your first brew is a good idea.
Frequently asked questions about the Sparge Arm
Does the Sparge Arm fit kettles other than Ss Brewtech?
It fits the Ss Brewtech Infusion Mash Tun, Project Brew kettles and other kettles with the same type of handle.
Which tubing do I need?
According to Ss Brewtech, use vinyl or silicone tubing with a 3/8" (10 mm) inner diameter between the hot liquor tank and the arm.
How do I adjust the flow rate?
Choose one of the three included flow discs and fine-tune by tightening the nozzle. A slow sparge usually gives the best result.
Related
Betaling
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.